Home ›

WinPwn 2.0 Released For Windows Users!

Submitted by Edward Kirk on July 24, 2008 - 12:05am.
in

Ladies and Gents, WinPwn 2.0, the jailbreak/pwning software for Windows users running the iPhone 2.0 software, has been released. Those of you looking to jailbreak your iPhone 3G, iPod touch or iPhone running the latest firmware version can now do so. The team posted the download and the instructions on their website.

WinPwn 2.0 features:

  • Support for both 1.1.4 and 2.0
  • Custom Image Support
  • Custom Payload Support
  • iPhone 3G support

Note: They strongly suggest that if you have WinPwn 1.0 already installed, that you remove it completely before installing WinPwn 2.0, as installing the new one over the old version will cause problems. They also remind you to make sure you have the latest version of iTunes.

Instructions (from the site):

  1. First create a custom IPSW using the IPSW Builder.
  2. Click "Ipwner" and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash Custom IPSW files via DFU mode.
  3. Once you have pwned Itunes, put your phone into DFU mode (With your iPhone connected to iTunes, hold down sleep/wake and home buttons for 7 seconds until the screen turns black, continue holding for 2 seconds, then remove your finger from the sleep/wake button until iTunes recognizes it.)
  4. Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file.

You can download WinPwn 2.0 from RapidShare.de or from RapidShare.com. More information is available at WinPwn.com.

Update: Before you all go and hack your iPhones, I should probably let you know that most of the apps in Installer.app and Cydia still need to be ported over to the 2.0 software. Also, there are reports that the software might still be a tad buggy. Let us know in the comments how it goes for you if you try it.

Thanks for the heads-up, Joe! You rock!

Submitted by MICHAELSD on July 24, 2008 - 12:22am.
Awesome! I wasn't really missing the apps from Installer, but they're still cool to have, especially with 3G.

Submitted by Revolution on July 24, 2008 - 12:44am.
my iphone 1st gen is already unlocked and I want to keep it that way or re-unlock it. Will this allow for that? I dont want to activate haha.

Submitted by Harry_Raisins on July 24, 2008 - 1:00am.
do you have to have 2.0 already? I have 1.1.4 running and dont want to have to restore my iphone and put everything back on.

Submitted by Revolution on July 24, 2008 - 2:09am.
I have 1.1.4

Submitted by rodi (not verified) on July 24, 2008 - 5:55am.
i cant build a custom ipsw it says fail building ipsw plz some one help

Submitted by Unregistered (not verified) on July 24, 2008 - 6:35am.
I have a normal iPhone unlcoked and jailbroken 1.1.4 with ziphone. Do I have to restore it or can I own it straight away?

help

Submitted by whoppery5k (not verified) on July 24, 2008 - 7:19am.
I have a i phone 3g and when i try to restore the new custom files i get i phone could not be restored for a unknow resson.

any ideas I am real new to this

Thanks

Submitted by rwin1 (not verified) on July 24, 2008 - 8:22am.
Great site mate. Thanks for sharing all the great Iphone news and info. Just came accross www.unlockappleiphone.com It also provide info on jailbreaking the Iphone. Do you know what kind of status this site has?

Thanks
Rwin

Yeaahaaaa! I love Dev Team

Submitted by Unregistered (not verified) on July 24, 2008 - 9:11am.
Congratulations to everybody! Enjoy the new software by WinPwn.

BTW i have recently brought your site a visit and I remembered it from the first time I tried to unlock my old Iphone. I worked nice and the software was working, so no probs for me. Seems to be a safe resource.

CU
Nathan

Submitted by Unregistered (not verified) on July 24, 2008 - 11:33am.
You can download it here quickly: http://www.iphone-hacks.com/downloads/file/115

Update iphone to 2.0 first?

Submitted by Unregistered (not verified) on July 24, 2008 - 11:50am.
Should i update to 2.0 first before using the software?

Problems with unlocking

Submitted by Unregistered (not verified) on July 24, 2008 - 11:57am.
I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work.

When I turn on my iPhone I only get:
SIM Locked
Insert an unlocked and valid SIM to activate iPhone.

So frustrating.

This is what I've done:
Downloaded a custom version 2 firmware
Downloaded and installed winpwn
Followed the instructions shown on your website
(The program log is like this:
24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1
24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed.
24.07.2008 18:36:11 - Failed to load image catalog
24.07.2008 18:36:13 - Failed to load payload catalog
24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw
24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
24.07.2008 18:37:56 - Be sure to connect an iPhone!
24.07.2008 18:38:26 - Killing Itunes
24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode)
Tried to get the phone out of DFU (i held the two buttons down for one minute).
Turned on the phone.

What should I do?

Submitted by Unregistered (not verified) on July 24, 2008 - 12:02pm.
Forgot to say that I of course have used the recovery thing in iTunes.

need help

Submitted by Unregistered (not verified) on July 24, 2008 - 12:06pm.
i have firmware 2.o..i have followed the instruction, but..it keep giving me error......pls help..i believed lots of peoples have the same problems..

Submitted by Unregistered (not verified) on July 24, 2008 - 1:43pm.
Quote:
Originally Posted by rodi View Post
i cant build a custom ipsw it says fail building ipsw plz some one help
http://theiphoneproject.org/index.ph...inpwn-20-guide

Submitted by Unregistered (not verified) on July 24, 2008 - 1:46pm.
Quote:
Originally Posted by Unregistered View Post
I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work.

When I turn on my iPhone I only get:
SIM Locked
Insert an unlocked and valid SIM to activate iPhone.

So frustrating.

This is what I've done:
Downloaded a custom version 2 firmware
Downloaded and installed winpwn
Followed the instructions shown on your website
(The program log is like this:
24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1
24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed.
24.07.2008 18:36:11 - Failed to load image catalog
24.07.2008 18:36:13 - Failed to load payload catalog
24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw
24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
24.07.2008 18:37:56 - Be sure to connect an iPhone!
24.07.2008 18:38:26 - Killing Itunes
24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode)
Tried to get the phone out of DFU (i held the two buttons down for one minute).
Turned on the phone.

What should I do?
http://theiphoneproject.org/index.ph...inpwn-20-guide

WinPwn 2.0 Download

Submitted by Unregistered (not verified) on July 24, 2008 - 2:17pm.
You can download it faster from this mirror: WinPwn 2.0 Download

What does it mean?

Submitted by sheep (not verified) on July 24, 2008 - 2:36pm.
I have a problem...
I have installed winpwn and the ipod touch firmware. But when i try to load winpwn there is a message which appears saying `To run this application, you must first install one of the following versions of the .NET framework:` and i can only click on the cross or `ok`. Please help, i'm new to this and don't understand it.

Thanks

3g iphone

Submitted by whoppery5k (not verified) on July 24, 2008 - 5:46pm.
will this jailbreak the 3g iphone...

i want to use a o2 sim with a better deal than i get off the i tariff but cant use the internet on my better deal

Program has Stopped working message.. Please Help

Submitted by inglettservices (not verified) on July 24, 2008 - 8:13pm.
I get all the way through the process of creating a custom .ipsw file and then i click iPwner and a message pops up saying that the program has stopped working. The program is working fine but Windows Vista is stopping it from Pwoning iTunes. Does anyone know how to get around this? Please help...

using edge with other o2 sim

Submitted by krk969 (not verified) on July 28, 2008 - 2:52am.
Quote:
Originally Posted by whoppery5k View Post
will this jailbreak the 3g iphone...

i want to use a o2 sim with a better deal than i get off the i tariff but cant use the internet on my better deal
Hi @ whoppery5k

try to reset your network settings and you should be ok as long as your phone is unlocked.

-cheers
krk

Submitted by Unregistered (not verified) on July 28, 2008 - 3:29pm.
Quote:
Originally Posted by Unregistered View Post
I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work.

When I turn on my iPhone I only get:
SIM Locked
Insert an unlocked and valid SIM to activate iPhone.

So frustrating.

This is what I've done:
Downloaded a custom version 2 firmware
Downloaded and installed winpwn
Followed the instructions shown on your website
(The program log is like this:
24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1
24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed.
24.07.2008 18:36:11 - Failed to load image catalog
24.07.2008 18:36:13 - Failed to load payload catalog
24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw
24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
24.07.2008 18:37:56 - Be sure to connect an iPhone!
24.07.2008 18:38:26 - Killing Itunes
24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode)
Tried to get the phone out of DFU (i held the two buttons down for one minute).
Turned on the phone.

What should I do?

That happened to me. I've tried to winpwn my 1st gen iphone with 2.0 many times and each time it didn't work and locked up my phone...
To get it out and restore it back to normal 2.0 connect it to your computer and run ziphone. Once the ziphone puts your iphone into normal dfu mode just close it out and then itunes will detect it and you can do a normal update/restore.

Help me understand

Submitted by Unregistered (not verified) on August 1, 2008 - 7:43am.
Can someone please explain what Jailbreak and what it does in plain simple layman's terms? I have a new iPhone 3G 16g

Sort of worked

Submitted by Unregistered (not verified) on August 4, 2008 - 7:28pm.
I got WinPwn 2.0 to create the custom ipsw however once it was loaded on my phone the phone would no longer get a cell signal. My phone was not unlocked when I tried and was running the correct version of iPhone firmware 2.0 on AT&T in US. I really don't know why it happened this way. I have used ziPhone to hack my phone in the past but unhacked it by restoring to 1.1.4 back in March (I think). I think I'll wait until some updates come out for WinPwn and for more applications to be switched over to the new 2.0 stuff. By then I'll probably own a 3G iPhone.

Thanks!

Submitted by Unregistered (not verified) on August 28, 2008 - 3:54am.
Hey guys,

thanks for you work, it is just perfekt!!=)

greetS