[Edward Kirk]

Those of you waiting for the Windows version of the latest PwnageTool are in luck. WinPwn 2.0.0.4 was just released. The new software offers support for iPod touches, iPhones, and iPhone 3Gs running 1.1.4, 2.0, 2.0.1. It also adds support for Root partition resizing, as well as Installer and support for WinXP and Vista in both 32/64bit. They note that a full uninstall of the previous version is required before installing this one.

• Make sure you have the latest version of iTunes ( Currently 7.7)


• WinPwn uses 300MB of ram at peak due to the ipsw being extracted in memory


• You must first click browse and load an IPSW to use WinPwn (i thought this was clear)


• For 2.0 only the *5A347_Restore.ipsw files are valid. The 345 image will not work


• If you see Failed to load image catalog/payload catalog, this is fine and won't cause problems


• If you already have service with AT&T do not activate or install Youtube Fix

Download 2.0.0.4 at Rapidshare.com or Rapidshare.de.

Thanks, Jose!

[deise boy]

right lets put this straight so all can understand.. i currently run 2.0 on my first gen iphone its unlocked and jailbroken with cydia on it ...
now

if i update to version 2.1 or whatever the version is on itunes my phone will lock ..
than i just run winpwn and it will unlock jailbreak my iphone back to al its glory with version 2.1 on it .. : cant wait for 2,1 as a fellow has doom for me when i do >>>
any replys please be specific in your answer as some people are new to this

My Ipod Touch with the original firmware 2.0.1 iPod1, 1_2.0.1_5B108_Restore.ipsw. Download WinPwn 2.0.0.4, pereproshil put Cydia.
Including touch and Itunes. Selected restore and pointed to a new firmware. Send an error loading and 6. If I program DFU error 1602.
Off lump connects Touch in another USB2. All the same thing. I had to return to the original firmware 2.0.1.
What do I do not know. It was earlier razloch past 2.0. Sduru upgraded, can not return back, some mistakes.
email 4321volga@gmail.com

[deise boy]

Originally Posted by Alex

My Ipod Touch with the original firmware 2.0.1 iPod1, 1_2.0.1_5B108_Restore.ipsw. Download WinPwn 2.0.0.4, pereproshil put Cydia.
Including touch and Itunes. Selected restore and pointed to a new firmware. Send an error loading and 6. If I program DFU error 1602.
Off lump connects Touch in another USB2. All the same thing. I had to return to the original firmware 2.0.1.
What do I do not know. It was earlier razloch past 2.0. Sduru upgraded, can not return back, some mistakes.
email 4321volga@gmail.com

anyone understand this /?????????????
not being rude but i havent a clue what he means

[salimkarim]

Originally Posted by deise boy

anyone understand this /?????????????
not being rude but i havent a clue what he means

lol not a clue, but back to deise boys question, is that how its done????

He's russian

[deise boy]

Originally Posted by deise boy

right lets put this straight so all can understand.. i currently run 2.0 on my first gen iphone its unlocked and jailbroken with cydia on it ...
now

if i update to version 2.1 or whatever the version is on itunes my phone will lock ..
than i just run winpwn and it will unlock jailbreak my iphone back to al its glory with version 2.1 on it .. : cant wait for 2,1 as a fellow has doom for me when i do >>>
any replys please be specific in your answer as some people are new to this

is there anyone to answer this as i would like to go to firmware 2.1 in itunes as i believe it to be more responsive as my mate has it done and than run winown to unlock and jailbreak my iphone again with cydia on it

[deise boy]

Originally Posted by Unregistered

He's russian

sorry to hear that

[JFrappuccino]

Originally Posted by deise boy

sorry to hear that

deiseboy I'm Russian
Is there a problem?
Also in response to your previous post
Just uninstall your current winpwn then install the new one and create a custom 2.01 ipsw and restore to it

[deise boy]

Originally Posted by JFrappuccino

deiseboy I'm Russian
Is there a problem?
Also in response to your previous post
Just uninstall your current winpwn then install the new one and create a custom 2.01 ipsw and restore to it

thank you and i was not being rude..
at least you can give me a straight answer
thank you again

[deise boy]

Originally Posted by deise boy

thank you and i was not being rude..
at least you can give me a straight answer
thank you again

rright i just went ahead and did it
my phone locked up did a restore .
nothing
panic set in
tried again
nothing
shit myself than
than

i just turned on the phone and it went back to version 2 unlocked and everything the same
fuk that not trying again
thought i lost my phone

[prince]

ok so heres the thing that i cant past....

it builds the ipsw and then shuts down... ?

any thoghts?

I had problems too. I built the custom firmware version 2.0.1 but got an error 6. Someone on Everythingicafe said that it has to do with the custom logo but I had not chosen one. Just got the error during the restore.

I am now back to the buggy 2.0.0. Bug heaven! I would go back to 1.1.4 but I bought some apps so i feel like I would be getting ripped off if I wasn't running them. LOL.

[prince]

that problome was fixed when i fixed the rang to 550 and not 500... try that and see if it works

Originally Posted by Unregistered

I had problems too. I built the custom firmware version 2.0.1 but got an error 6. Someone on Everythingicafe said that it has to do with the custom logo but I had not chosen one. Just got the error during the restore.

I am now back to the buggy 2.0.0. Bug heaven! I would go back to 1.1.4 but I bought some apps so i feel like I would be getting ripped off if I wasn't running them. LOL.

Errors with low numbers indicate that you are not in DFU mode when trying to restore.

Hold the home and power buttons for exactly 10 seconds
Release the power button and keep holding the home button for another 10 seconds
Your screen should not come on at all, but iTunes will recognize a device in recovery mode.
Also if you're on windows, their should be a message that pops up in your task bar telling you that it found a "Apple Device (DFU) Recovery Mode"

[deise boy]

Originally Posted by Unregistered

Errors with low numbers indicate that you are not in DFU mode when trying to restore.

Hold the home and power buttons for exactly 10 seconds
Release the power button and keep holding the home button for another 10 seconds
Your screen should not come on at all, but iTunes will recognize a device in recovery mode.
Also if you're on windows, their should be a message that pops up in your task bar telling you that it found a "Apple Device (DFU) Recovery Mode"

i was in dfu mode and got error 1601
believe me i tried everything mate was lucky i got my phone back running mate
2.0 isnt buggy on my phone at all perfect in fact i just wanted 2.1 for to play doom

[deise boy]

Right Lets Start As A Few Are Getting There Heads Messed Up With All This Pwning And Jailbreaking Unlocking Stuff..

I Own A Iphone Running 2.0 Software Which It Tells Me In Itunes.. It Is Also Unlocked And Jailbroken...

Itunes Says There Is An Update For My Phone Version 2,1

I Know If I Download And Install It My Phone Will Lock So???????

If I Download And Install Will Running Winpwn Unlock And Jailbreak
My Iphone 2.0 To Version 2.1 Or Not//
I Follow The Winown Guide And Almost Fuked It Completely Luckily And Strangely Itunes Restored It Back To 2.0 { Weird}
So The Question Is
If I Update To 2.1 Will Winpwn Unlock And Jailbreak It To 2.1
Thanks For Looking At This Post And Hope It Clears Up Stuff For Others As Well
Long Live Iphone Alley

[deise boy]

FOUND THIS ON ANOTHER SITE
iPod Touched wrote:
Last night I tested 2.0.1 and here some key points.

Please remember to update NOT restore!

iPod Touch - You can upgrade and not lose your Pwn status, but you will lose your jailbroken status. You will lose Cydia and all non approved Apple apps.

iPhone [first gen] - You can upgrade and not lose your Pwn status, but you will lose your jailbroken status. You will lose Cydia and non approved Apple apps. You will keep your unlock status though

Note: 2G owners are not in any danger of permanently losing either jailbreak or unlock, no matter what they update to. The baseband for 2G is fully controllable. The same applies to the iPod Touch since there is no baseband. So you will always be able to jailbreakand unlock your 2G iPhone and jailbreak your iPod Touch.

So you will be able to restore to the custom firmware and have no issues. You will need to reisntall all apps you previously had.

iPhone [3G] - if you plan to unlock when the unlock is available DO NOT UPGRADE. Below is from the iPhone Dev team.

* If your 3G iPhone is on a regular contract and you always plan to be with the carrier then you can update but you will lose the jailbreak and access to third party (non AppStore) applications.

* If your 3G iPhone is not on a regular contract and you plan to use it on an alternative network to the carrier that supplied it then do not update unless you do it with the impending PwnageTool update.

* PwnageTool v2.0.1 does not work with version 2.0.1 of the iPhone or iPod update from Apple.

* We will release an update to PwnageTool when the testing has been completed and all applied changes have been checked for