WinPwn 2.0 Released For Windows Users!

Edward Kirk · July 24th, 2008, 01:05 AM

Ladies and Gents, WinPwn 2.0, the jailbreak/pwning software for Windows users running the iPhone 2.0 software, has been released. Those of you looking to jailbreak your iPhone 3G, iPod touch or iPhone running the latest firmware version can now do so. The team posted the download and the instructions on their website.

WinPwn 2.0 features:

Support for both 1.1.4 and 2.0

Custom Image Support

Custom Payload Support

iPhone 3G support

Note: They strongly suggest that if you have WinPwn 1.0 already installed, that you remove it completely before installing WinPwn 2.0, as installing the new one over the old version will cause problems. They also remind you to make sure you have the latest version of iTunes.

Instructions (from the site):

First create a custom IPSW using the IPSW Builder.

Click "Ipwner" and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash Custom IPSW files via DFU mode.

Once you have pwned Itunes, put your phone into DFU mode (With your iPhone connected to iTunes, hold down sleep/wake and home buttons for 7 seconds until the screen turns black, continue holding for 2 seconds, then remove your finger from the sleep/wake button until iTunes recognizes it.)

Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file.

You can download WinPwn 2.0 from RapidShare.de or from RapidShare.com. More information is available at WinPwn.com.

Update: Before you all go and hack your iPhones, I should probably let you know that most of the apps in Installer.app and Cydia still need to be ported over to the 2.0 software. Also, there are reports that the software might still be a tad buggy. Let us know in the comments how it goes for you if you try it.

Thanks for the heads-up, Joe! You rock!

MICHAELSD · July 24th, 2008, 01:22 AM #2

Awesome! I wasn't really missing the apps from Installer, but they're still cool to have, especially with 3G.

Revolution · July 24th, 2008, 01:44 AM #3

my iphone 1st gen is already unlocked and I want to keep it that way or re-unlock it. Will this allow for that? I dont want to activate haha.

Harry_Raisins · July 24th, 2008, 02:00 AM #4

do you have to have 2.0 already? I have 1.1.4 running and dont want to have to restore my iphone and put everything back on.

Revolution · July 24th, 2008, 03:09 AM #5

I have 1.1.4

July 24th, 2008, 06:55 AM #6

i cant build a custom ipsw it says fail building ipsw plz some one help

July 24th, 2008, 07:35 AM #7

I have a normal iPhone unlcoked and jailbroken 1.1.4 with ziphone. Do I have to restore it or can I own it straight away?

**help** - July 24th, 2008, 08:19 AM #8

I have a i phone 3g and when i try to restore the new custom files i get i phone could not be restored for a unknow resson.

any ideas I am real new to this

**Thanks** - July 24th, 2008, 09:22 AM #9

Great site mate. Thanks for sharing all the great Iphone news and info. Just came accross www.unlockappleiphone.com It also provide info on jailbreaking the Iphone. Do you know what kind of status this site has?

Thanks
Rwin

July 24th, 2008, 10:11 AM

Congratulations to everybody! Enjoy the new software by WinPwn.

BTW i have recently brought your site a visit and I remembered it from the first time I tried to unlock my old Iphone. I worked nice and the software was working, so no probs for me. Seems to be a safe resource.

CU
Nathan

July 24th, 2008, 12:33 PM #11

You can download it here quickly: http://www.iphone-hacks.com/downloads/file/115

July 24th, 2008, 12:50 PM

Should i update to 2.0 first before using the software?

**Problems with unlocking** - July 24th, 2008, 12:57 PM #13

I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work.

When I turn on my iPhone I only get:
SIM Locked
Insert an unlocked and valid SIM to activate iPhone.

So frustrating.

This is what I've done:
Downloaded a custom version 2 firmware
Downloaded and installed winpwn
Followed the instructions shown on your website
(The program log is like this:
24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1
24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed.
24.07.2008 18:36:11 - Failed to load image catalog
24.07.2008 18:36:13 - Failed to load payload catalog
24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw
24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
24.07.2008 18:37:56 - Be sure to connect an iPhone!
24.07.2008 18:38:26 - Killing Itunes
24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode)
Tried to get the phone out of DFU (i held the two buttons down for one minute).
Turned on the phone.

What should I do?

July 24th, 2008, 01:02 PM #14

Forgot to say that I of course have used the recovery thing in iTunes.

**need help** - July 24th, 2008, 01:06 PM #15

i have firmware 2.o..i have followed the instruction, but..it keep giving me error......pls help..i believed lots of peoples have the same problems..

July 24th, 2008, 02:43 PM #16

Quote:

Originally Posted by rodi

i cant build a custom ipsw it says fail building ipsw plz some one help

http://theiphoneproject.org/index.ph...inpwn-20-guide

July 24th, 2008, 02:46 PM #17

Quote:

Originally Posted by Unregistered

I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work.

When I turn on my iPhone I only get:
SIM Locked
Insert an unlocked and valid SIM to activate iPhone.

So frustrating.

This is what I've done:
Downloaded a custom version 2 firmware
Downloaded and installed winpwn
Followed the instructions shown on your website
(The program log is like this:
24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1
24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed.
24.07.2008 18:36:11 - Failed to load image catalog
24.07.2008 18:36:13 - Failed to load payload catalog
24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw
24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone
24.07.2008 18:37:56 - Be sure to connect an iPhone!
24.07.2008 18:38:26 - Killing Itunes
24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode)
Tried to get the phone out of DFU (i held the two buttons down for one minute).
Turned on the phone.

What should I do?

http://theiphoneproject.org/index.ph...inpwn-20-guide

**WinPwn 2.0 Download** - July 24th, 2008, 03:17 PM #18

You can download it faster from this mirror: WinPwn 2.0 Download

**What does it mean?** - July 24th, 2008, 03:36 PM #19

I have a problem...
I have installed winpwn and the ipod touch firmware. But when i try to load winpwn there is a message which appears saying `To run this application, you must first install one of the following versions of the .NET framework:` and i can only click on the cross or `ok`. Please help, i'm new to this and don't understand it.

Thanks

**3g iphone** - July 24th, 2008, 06:46 PM #20

will this jailbreak the 3g iphone...

i want to use a o2 sim with a better deal than i get off the i tariff but cant use the internet on my better deal

Unregistered Guest Posts: n/a	Yeaahaaaa! I love Dev Team - July 24th, 2008, 10:11 AM #10
Unregistered Guest Posts: n/a	Congratulations to everybody! Enjoy the new software by WinPwn. BTW i have recently brought your site a visit and I remembered it from the first time I tried to unlock my old Iphone. I worked nice and the software was working, so no probs for me. Seems to be a safe resource. CU Nathan

Unregistered Guest Posts: n/a	Update iphone to 2.0 first? - July 24th, 2008, 12:50 PM #12
Unregistered Guest Posts: n/a	Should i update to 2.0 first before using the software?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Edward Kirk WrAdminterizer Join Date: Apr 2007 Location: Illinois, USA Posts: 3,088 Thanks: 19 Thanked 26 Times in 25 Posts	WinPwn 2.0 Released For Windows Users! - July 24th, 2008, 01:05 AM #1
	<script language="JavaScript" src="http://adserver1.backbeatmedia.com/servlet/ajrotator/13894/222/viewJScript?pool=13886&type=3158&pos=20&zone=5000"></script> Ladies and Gents, WinPwn 2.0, the jailbreak/pwning software for Windows users running the iPhone 2.0 software, has been released. Those of you looking to jailbreak your iPhone 3G, iPod touch or iPhone running the latest firmware version can now do so. The team posted the download and the instructions on their website. WinPwn 2.0 features: Support for both 1.1.4 and 2.0 Custom Image Support Custom Payload Support iPhone 3G support Note: They strongly suggest that if you have WinPwn 1.0 already installed, that you remove it completely before installing WinPwn 2.0, as installing the new one over the old version will cause problems. They also remind you to make sure you have the latest version of iTunes. Instructions (from the site): First create a custom IPSW using the IPSW Builder. Click "Ipwner" and browse for the custom IPSW that you just created. This will pwn itunes and allow you to flash Custom IPSW files via DFU mode. Once you have pwned Itunes, put your phone into DFU mode (With your iPhone connected to iTunes, hold down sleep/wake and home buttons for 7 seconds until the screen turns black, continue holding for 2 seconds, then remove your finger from the sleep/wake button until iTunes recognizes it.) Once you are in DFU mode Itunes will pop up and then you can hold shift and click restore and browse to your custom IPSW file. You can download WinPwn 2.0 from RapidShare.de or from RapidShare.com. More information is available at WinPwn.com. Update: Before you all go and hack your iPhones, I should probably let you know that most of the apps in Installer.app and Cydia still need to be ported over to the 2.0 software. Also, there are reports that the software might still be a tad buggy. Let us know in the comments how it goes for you if you try it. Thanks for the heads-up, Joe! You rock! __________________ About my iPhone: iPhone & Color: iPhone 3G 16GB White iPhone Version: 3.0 Computer & OS: MacBook Pro 15", Mac OS X 10.5.4 Twitter

MICHAELSD Rocks the Board Join Date: Aug 2007 Posts: 253 Thanks: 1 Thanked 5 Times in 5 Posts	July 24th, 2008, 01:22 AM #2
	Awesome! I wasn't really missing the apps from Installer, but they're still cool to have, especially with 3G.

Revolution New Recruit Join Date: Jan 2008 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	July 24th, 2008, 01:44 AM #3
	my iphone 1st gen is already unlocked and I want to keep it that way or re-unlock it. Will this allow for that? I dont want to activate haha.

Harry_Raisins Forum Lurker Join Date: Jun 2008 Posts: 7 Thanks: 0 Thanked 0 Times in 0 Posts	July 24th, 2008, 02:00 AM #4
	do you have to have 2.0 already? I have 1.1.4 running and dont want to have to restore my iphone and put everything back on.

Revolution New Recruit Join Date: Jan 2008 Posts: 19 Thanks: 0 Thanked 0 Times in 0 Posts	July 24th, 2008, 03:09 AM #5
	I have 1.1.4

rodi Guest Posts: n/a	July 24th, 2008, 06:55 AM #6
rodi Guest Posts: n/a	i cant build a custom ipsw it says fail building ipsw plz some one help

Unregistered Guest Posts: n/a	July 24th, 2008, 07:35 AM #7
Unregistered Guest Posts: n/a	I have a normal iPhone unlcoked and jailbroken 1.1.4 with ziphone. Do I have to restore it or can I own it straight away?

whoppery5k Guest Posts: n/a	help - July 24th, 2008, 08:19 AM #8
whoppery5k Guest Posts: n/a	I have a i phone 3g and when i try to restore the new custom files i get i phone could not be restored for a unknow resson. any ideas I am real new to this

rwin1 Guest Posts: n/a	Thanks - July 24th, 2008, 09:22 AM #9
rwin1 Guest Posts: n/a	Great site mate. Thanks for sharing all the great Iphone news and info. Just came accross www.unlockappleiphone.com It also provide info on jailbreaking the Iphone. Do you know what kind of status this site has? Thanks Rwin

Unregistered Guest Posts: n/a	July 24th, 2008, 12:33 PM #11
Unregistered Guest Posts: n/a	You can download it here quickly: http://www.iphone-hacks.com/downloads/file/115

Unregistered Guest Posts: n/a	Problems with unlocking - July 24th, 2008, 12:57 PM #13
Unregistered Guest Posts: n/a	I can't believe this. Two days ago I updated my iPhone 1st gen to Firmware 2, and since then Ive been trying to unlock and downgrade, without any success. I just tried WinPwn but it still doesn't work. When I turn on my iPhone I only get: SIM Locked Insert an unlocked and valid SIM to activate iPhone. So frustrating. This is what I've done: Downloaded a custom version 2 firmware Downloaded and installed winpwn Followed the instructions shown on your website (The program log is like this: 24.07.2008 18:36:06 - This is winpwn ver.:2.0.0.1 RC1 24.07.2008 18:36:06 - Apple Mobile Device Support Version 2.0.0.33 installed. 24.07.2008 18:36:11 - Failed to load image catalog 24.07.2008 18:36:13 - Failed to load payload catalog 24.07.2008 18:37:56 - File from:C:\Users\Sammy\Desktop\iPhone1,1_2.0_5A347_Re store.ipsw 24.07.2008 18:37:56 - Recognized as:iPhone1,1_2.0_5A347_Restore.ipsw Type: IPSW_iPhone 24.07.2008 18:37:56 - Be sure to connect an iPhone! 24.07.2008 18:38:26 - Killing Itunes 24.07.2008 18:38:27 - Itunes has been pwned. You can now restore your ipsw using DFU Mode) Tried to get the phone out of DFU (i held the two buttons down for one minute). Turned on the phone. What should I do?

Unregistered Guest Posts: n/a	July 24th, 2008, 01:02 PM #14
Unregistered Guest Posts: n/a	Forgot to say that I of course have used the recovery thing in iTunes.

Unregistered Guest Posts: n/a	need help - July 24th, 2008, 01:06 PM #15
Unregistered Guest Posts: n/a	i have firmware 2.o..i have followed the instruction, but..it keep giving me error......pls help..i believed lots of peoples have the same problems..

Unregistered Guest Posts: n/a	WinPwn 2.0 Download - July 24th, 2008, 03:17 PM #18
Unregistered Guest Posts: n/a	You can download it faster from this mirror: WinPwn 2.0 Download

sheep Guest Posts: n/a	What does it mean? - July 24th, 2008, 03:36 PM #19
sheep Guest Posts: n/a	I have a problem... I have installed winpwn and the ipod touch firmware. But when i try to load winpwn there is a message which appears saying `To run this application, you must first install one of the following versions of the .NET framework:` and i can only click on the cross or `ok`. Please help, i'm new to this and don't understand it. Thanks

whoppery5k Guest Posts: n/a	3g iphone - July 24th, 2008, 06:46 PM #20
whoppery5k Guest Posts: n/a	will this jailbreak the 3g iphone... i want to use a o2 sim with a better deal than i get off the i tariff but cant use the internet on my better deal