Done 1.1.2 to 1.1.1..OK ...anySIM ok..but now NETWORK = Not Available (?)

[roposo]

Done 1.1.2 to 1.1.1..OK ...anySIM ok..but now NETWORK = Not Available (?)


I UPDATED the iPhone from 1.1.2 to 1.1.1 and was able to go from Modem Firmware 04.02.13-G to 03.14.08-G and installed AnySIM... I thought THAT WAS IT, so I istalled my ATT SIM and used ANYSIM and thought I would be able to make calls, but THERE is NO NETWORK and NO SERVICE... Mhhh...

Also the iPhone is NOT recognized by iTunes anymore....BUT I am sure then I most be missing some steps or did something wrong at the end...(?) :confused:

Any ideas? Detailed "Step by step" highly appreciated.... I know I might be asking something so basic for most of you guys, but I am so close to finally be able to use my phone for the firts time... you know the feeling.

Thanks

[mr.sanjeev]

Done 1.1.2 to 1.1.1..OK ...anySIM ok..but now NETWORK = Not Available (?)


I UPDATED the iPhone from 1.1.2 to 1.1.1 and was able to go from Modem Firmware 04.02.13-G to 03.14.08-G and installed AnySIM... I thought THAT WAS IT, so I istalled my ATT SIM and used ANYSIM and thought I would be able to make calls, but THERE is NO NETWORK and NO SERVICE... Mhhh...

Also the iPhone is NOT recognized by iTunes anymore....BUT I am sure then I most be missing some steps or did something wrong at the end...(?) :confused:

Any ideas? Detailed "Step by step" highly appreciated.... I know I might be asking something so basic for most of you guys, but I am so close to finally be able to use my phone for the firts time... you know the feeling.

Thanks

Anyone plz reply.......
My pr0b is same......

[gqtrebor]

use this guide to help you.

http://www.hacktheiphone.com/111/iphone_step_1.html

and then this guide

http://www.hacktheiphone.com/112/iphone_update_112_unlock_windows.html

[Severed]

Done 1.1.2 to 1.1.1..OK ...anySIM ok..but now NETWORK = Not Available (?)


I UPDATED the iPhone from 1.1.2 to 1.1.1 and was able to go from Modem Firmware 04.02.13-G to 03.14.08-G and installed AnySIM... I thought THAT WAS IT, so I istalled my ATT SIM and used ANYSIM and thought I would be able to make calls, but THERE is NO NETWORK and NO SERVICE... Mhhh...

Also the iPhone is NOT recognized by iTunes anymore....BUT I am sure then I most be missing some steps or did something wrong at the end...(?) :confused:

Any ideas? Detailed "Step by step" highly appreciated.... I know I might be asking something so basic for most of you guys, but I am so close to finally be able to use my phone for the firts time... you know the feeling.

Thanks

The only mistake you made was not restoring 1.1.1 after downgrading the baseband from the 4.02.13. All you have to do now is restore 1.1.1 and then jailbreak and run anysim, but this will have to be done after you re-virginize the baseband you already hit up with AnySim.

[roposo]

Yes I tried but I can not get the Phone out of the iTunes screen page...

I even tried the NORMAL iTUNEs UPDATE and the phone does not work anymore

What now? Send to mark@hacktheiphone.com ???

:(

Phone is LOCKED with ERROR 1604 (?)

[Severed]

If you're on windows open up iBrickr and force it to reboot. iBrickr is great to have around for such time a as this.

[roposo]

?

[gqtrebor]

do a restore, turn itunes on. plug the iphone into the usb cable. turn iphone on. hold both the power button down and the home button down at the same time. then count to 10. release the power button, keep holding the home button. now wait about another ten seconds or so.this should put the iphone in restore mode.

[roposo]

this is addictive!!!!

[Turbojugend]

I am confused, I thought 1.1.2 couldn't be unlocked, only jailbroken? How did you downgrade the modem firmware?

[gqtrebor]

You can 1.1.2 but it has to be a iphone that dident come with that version.